Ajba, S., Humphrey, A. E, and Millis, N. (1973) Biochemical
Engineering. Academic Press, London. Banks, G. T. (1977) Aeration of moulds and streptomycete culture fluids. Topics in Enzyme and Fermentation Biotechnology, Vol. 1, pp. 72-110 (Editor Wiseman, A.). Ellis Horwood, Chichester.
q f (1979) Scale-up of fermentation processes. Topin Enzyme and Fermentation Biotechnology, Vol. 3, pp.
170-267 (Editor Wiseman, A.). Ellis Horwood, Chich-
^niOMEW W. H. (1960) Scale-up of submerged fermentations. Adv. App. Micro. 2, 289-300.
„u.,'[olomew, w. H., Karrow, E. O., Sfat, M. R. and \viliielm, R H. (1950) Oxygen transfer and agitation in submerged fermentations. Mass transfer of oxygen in ubnierged fermentations of Streptomyces griseus. Ind. ]\g. Chem. 42 (9), 1801-1809.
j G H. and Gallo, M. (1971) Effect of impurities on oxygen transfer. Process Biochem. 6 (4), 33-35.
Bi i mar-Beiny, M. T. and Thomas, C. R. (1990) Morphology and clavulanic acid production of Streptomyces elavuligerus: effect of stirred speed in batch fermentation. Biotech. Bioeng. 37 (5), 456-462.
Bi-rkman-Dik, T., Ozilgen, M. and Bozoglu, T. F. (1992) s tit EDTA, and pH effects on rheological behavior of mold suspensions. Enzyme Microb. Technol. 14, 944-948.
Bn secker, B. O. (1972) Begasen von Flüssigkeiten mit Ruhrem.
\ DI, Forschungsheft.
Buckland, B. C. (1993) Mevinolin production. Paper presented at the Soc. Gen. Microbiol. 124th Meeting, University of Kent, Canterbury, January 1993.
Bucki.and, B. C, Gbewonyo, K., Jain, D., Glazomitsky, K., Hunt, G. and Drew, S. W. (1988) Oxygen transfer efficiency of hydrofoil impellers in both 800L and 1900L fermenters. In Proceedings of the 2nd. International Conference on Bioreactor Fluid Dynamics, pp. 1-16 (Editor, King, R.). Elsevier, London.
Bucki and, B. C, Gbewonyo, K., Hallada, T., Kaplan, L. and Masurekar, P. (1989) In Novel Microbial Products in Medicine and Agriculture, pp. 161-169 (Editor, Demain, \ L.). Elsevier, Amsterdam.
Cakilli, A., Chain, E. B., Gaulandi, G. and Morisi, G. (1961) Aeration studies III. Continuous measurements of dissolved oxygen in fermentation broths — Rheology and mass transfer. Biotech. Bioeng. 18, 745-790.
Casson, N. (1959) Rheology of Disperse Systems. Pergamon Press, Oxford.
Chapman, C. M., Nienow, A. W., Cooke, M. and Middleton, J. C. (1983) Particle-gas-liquid mixing in stirred vessels. Part 3. Chem. Eng. Res. Des. 61 (3), 167-181.
Charles, M. (1978) Technical aspects of the rheological properties of microbial cultures. Adv. Biochem. Eng. 8, 1-62.
Chen, N. Y. (1990) The design of airlift fermenters for use in biotechnology. Biotechnol. Gen. Eng. Rev. 8, 379-396.
Cooke, M., Middleton, J. C. and Bush, J. R. (1988) Mixing and mass transfer in filamentous fermentations. In Proceedings of the 2nd International Conference on Bioreactor Fluid Dynamics, pp. 37-64 (Editor, King, R.). Elsevier, London.
Cooney, C. L. (1979) Conversion yields in penicillin production: Theory versus practice. Process Biochem. 14 (5), 31-33.
Cooper, C. M., Fernstrom, G. A. and Miller, S. A. (1944) Performance of agitated gas-liquid contacters. Ind. Eng. Chem. 36, 504-509.
Darlington, W. A. (1964) Aerobic hydrocarbon fermentation — A practical evaluation. Biotech. Bioeng. 6 (2), 241-242.
Deckwer, W. D., Nguyen-Tien, K., Schumpe, A. and Serpe-men, Y. (1982) Oxygen mass transfer into aerated CMC solutions in a bubble column. Biotech. Bioeng. 24, 461-481.
Deindoerfer, F. H. and Gaden, E. L. (1955) Effects of liquid physical properties on oxygen transfer in penicillin fermentation. Appl. Micro. 3, 253-257.
Deindoerfer, F. H. and West, J. M. (1960) Rheological examination of some fermentation broths. J. Microbiol. Biochem. Technol. Eng. 2, 165-175.
Dion, W. M., Casilli, A., Sermonti, G. and Chain, E. B. (1954) The effect of mechanical agitation on the morphology of Penicillium chrysogenum Thom in stirred fermenters. Rend. 1st Super Sanita 17, 187-205.
Feuen, J., Heijnen, J. J. and Van't Riet, K. (1987) Gas hold-up and flooding in large-scale fermenters. In Proceedings of Symposium on mixing and dispersion processes. Inst. Chem. Eng. and KIVI/NIRIA. Delft Technical University.
Fox, R. I. (1978) The applicability of published scale-up criteria to commercial fermentation processes. Proc. 1st Eur. Cong. Biotechnol., Part 1, pp. 80-83.
Gallindo, E. and Nienow, A. W. (1992) Mixing of highly viscous simulated fermentation broths with the Lightnin' A-315 impeller. Biotechnol. Prog. 8, 233-239.
Gbewonyo, K., Dimasi, D. and Buckland, B. C. (1986) The use of hydrofoil impellers to improve oxygen transfer efficiency in viscous mycelial fermentations. In International Conference on Biorector Fluid Dynamics, pp. 281-299. BHRA, Cranfield, U.K.
Goldberg, I., Rock, J. S., Ben-Bassat, A. and Mateles, R. I. (1976) Bacterial yields on methanol, methylamine, formaldehyde and formate. Biotech. Bioeng. 18, 1657-1668.
Hall, M. J., Dickinson, S. D., Pritchard, R. and Evans, J. I. (1973) Foams and foam control in fermentation processes. Prog. Ind. Micro. 12, 171-234.
Heijnen, J. J., Riet, K. W. and Wolthuis, A. J. (1980) Influence of very small bubbles on the dynamic KLa measurement in viscous gas-liquid systems. Biotech. Bioeng. 22, 1945-1956.
Heijnen, J. J. and Van't Riet, K. (1984) Mass transfer, mixing and heat transfer phenomena in low viscosity bubble column reactors. Chem. Eng. J. 28, B21.
Heineken, F. G. (1970) Use of fast-response dissolved oxygen probes for oxygen transfer studies. Biotech. Bioeng. 12, 145-154.
Heineken, F. G. (1971) Oxygen mass transfer and oxygen respiration rate measurements utilising fast response oxygen electrodes. Biotech. Bioeng. 13, 599-618.
Hirose, Y. and Shibai, H. (1980) Effect of oxygen on amino acids fermentation. Advances in Biotechnology, Vol. 1, pp.
329-333 (Editors Moo-Young, M., Robinson, C. W. and Vezina, C.). Pergamon Press, Toronto.
Hobbs, G., Frazer, C. M., Gardner, D. C. J., Cullum, J. A. and Oliver, S. G. (1989) Dispersed growth of Strep-tomyces in liquid culture. Appl. Microbiol Biotechnol. 31 (3), 272-277.
Hubbard, D. W. (1987) Scale-up strategies for bioreactors containing non-Newtonian broths. Ann. N.Y. Acad. Sci., 506, 600-607.
Hubbard, D. W., Harris, L.R. and Wierenga, M. K. (1988) Scale-up for polysaccharide fermentation. Chem. Eng. Prog. 84 (8), 55-61.
Hughmark, G. A. (1980) Power requirements and interfacial area in gas-liquid turbine agitated systems. Ind. Eng. Chem. Proc. Des. Dev. 19, 638-645.
Jem, K. J. (1989) Scale-down techniques in fermentation. Biopharmacology 2, 30-39.
Johnson, M. J. (1964) Utilisation of hydrocarbons by microorganisms. Chem. Ind. 36, 1532-1537.
Kobayashi, T., Van Dedem, G. and Moo-Young, M. (1973) Oxygen transfer into mycelial pellets. Biotech. Bioeng. 15, 27-45.
Kuenzi, M. T. (1978) Process design and control in antibiotic fermentation. In Antibiotics and Other Secondary Metabolites, Biosynthesis and Production, FEMS Symp. Vol. 5, pp. 39-56 (Editors Hutter, R., Leisinger, T., Neusch and Wehrli, W.). Academic Press, London.
Legrys, G. A. and Solomons, G. L. (1977) US patent application 23128.
Lilly, M. D. (1983) Problems in process scale-up. In Bioactive Microbial Products 2. Development and Production, pp. 79-90 (Editors Nisbet, L. J. and Winstanley, D. J.). Academic Press, London.
Lilly, M. D, Ison, A. and Shamlou, P. A. (1992) The influence of the physical environment in fermenters on antibiotic production by micro-organisms. In Harnessing Biotechnology in the 21st Century (Editors Ladisch, M. R. and Bose, A.). American Chemical Society, Washington, DC.
Mateles, R. I. (1971) Calculation of the oxygen required for cell production. Biotech. Bioeng. 13 (4), 581-582.
Mateles, R. I. (1979) The physiology of single cell protein (SCP) production. Soc. Gen. Microbiology Symposium, 29, Microbial Technology: Current State, Future Prospects, pp. 29-52 (Editors, Bull. A. T., Ellwood, D. C. and Ratledge, C.). Cambridge University Press, Cambridge.
Mavituna, F. and Sinclair, C. G. (1985a) A graphical method for the determination of critical biomass concentration for non-oxygen limited growth. Biotechnol. Lett. 7, 69-74.
Mavituna, F. and Sinclair, C. G. (1985b) Reply to a comment on 'A graphical method for the determination of critical biomass concentration for non-oxygen limited growth'. Biotechnol. Lett. 7, 813-814.
Metz, B. and Kossen, N. W. F. (1977) Pellet growth of moulds. Biotech. Bioeng. 19, 781-799.
Metz, B., Kossen, N. W. F. and Van Suijdam, J. C. (1979)
Rheology of mould suspensions. Adv. Biochem. Eng \ \ 103-156. ' '
Metzner, A. B. and Otto, R. E. (1957) Agitation of non Newtonian fluids. A.I.Ch.E.J. 3 (1), 3-10.
Metzner, A. B., Feehs, R. H., Ramos, H. L., Otto, R. e. and Toothill, J. D. (1961) Agitation of viscous Newtonian and non-Newtonian fluids. A.I.Ch.E.I. 7, 3-9.
Michell, B. J. and Miller, S. A. (1962) Power requirements of gas-liquid agitated systems. A.I.Ch.El. 8, 262-266.
Nienow, A. W. and Elson, T. P. (1988) Aspects of mixing in Theologically complex liquids. Chem. Eng. Res. Des., 6f> 5-15.
Nienow, A. W., Wisdom, D. J. and Middleton, J. C. (1977) The effect of scale and geometry on flooding, recirculation and power in gassed stirred vessels. Paper Fl, 2nd. Eur. Conf. on Mixing, March 1977, Cambridge.
Oldshue, J. Y. (1985) Current trends in mixer scale-up techniques. In Mixing of Liquids by Mechanical Agitation pp. 309-341 (Editors Ulbrecht, J. and Patterson, G. K.). Gordon and Breach, New York.
Olsvik, E. S. and Kristlansen, B. (1992) Influence of oxygen tension, biomass concentration and specific growth rate on the rheological properties of a filamentous fermentation broth. Biotech. Bioeng. 40, 1293-1299.
Oosterhuis, N. M. G and Koerts, K. (1987) Method and reactor vessel for the fermentation production of polysaccharides in particular, xanthan. Eur. Pat. Appl. EP 249,288.
Righelato, R. C. (1979) The kinetics of mycelial growth. In Fungal Walls and Hyphal Growth, pp. 1385-1402 (Editors Burnett, J. H. and Trinci. A. P. J.). Cambridge University Press, Cambridge.
Righelato, R. C., Trinci, A. P. J., Pirt, S. J. and Peat, A. (1968) Influence of maintenance energy and growth rate on the metabolic activity, morphology and conidiation of Penicillium chrysogenum. I. Gen. Micro. 50 (1), 394-412.
Riviere, J. (1977) Industrial Application of Microbiology (translated and edited by Moss, M. O. and Smith, J. E.). Surrey University Press, Guildford.
Roels, J. A., Van Denberg, J. and Vonken, R. M. (1974) The rheology of mycelial broths. Biotech. Bioeng. 16, 181-208.
Rushton, J. H., Costich, E. W. and Everett, H. J. (1950) Power characteristics of mixing impellers. Chem. Eng. Prog. 46, 395-404.
Sato, K (1961) Rheological studies on some fermentation broths. (IV) Effect of dilution rate on rheological properties of fermentation broth. /. Ferment. Technol. 39, 517-520.
Schugerl, K, Wittler, R. and Lorenz, T. (1988) The use of moulds in pellet form. Trends Biotechnol. 1 (4), 120-122.
Schulze, K. L. and Life, R. S. (1964) Relationship between substrate concentration, growth rate and respiration rate of Escherichia coli in continuous culture. Archiv. Mikrobiol., 48, 1-20.
Scragg, A. H. 1991 Bioreactors in Biotechnology. A Practical Approach. Ellis Horwood, Chichester.
Steel, R. and Maxon, W. D. (1966) Studies with a multiple-rod mixing impeller. Biotech. Bioeng. 8, 109-116.
SUT'll'K1m)lysaccharides — industrial polymers of current and Tturc potential. In Soc. Gen. Microbiology Symposium, 70 Microbial Technology: Current State, Future Prospects, 107-150 (Editors, Bull, A. T., Ellwood, D. C. and pledge, C.). Cambridge University Press, Cambridge.
d u Vl971) The nature of fermentation fluids. Adv.
Biuchem. Eng. 1, i « HI H and Humphrey, A. E. (1966) Dynamic measure-
mpnt of the volumetric oxygen transfer coefficient in fermentation systems. /. Ferm. Technol. 44 (12), 881-889.
Taguchi H, Imanaka, T„ Teramoto, S„ Takatsu, M. and Sato M (1968) Scale-up of glucamylase fermentation by Endomyces sp. /. Ferm. Technol. 46 (10), 823-828.
Trinci A. P. J- (I983) Effect of Junlon on the morphology of Aspergillus niger and its use in making turbidity measurements of microbial growth. Trans. Br. Mycol. Soc. 58, 467-473.
TuffilE, C. M. and Pinho, F. (1970) Determination of oxygen transfer coefficients in viscous streptomycete fermentations. Biotech. Bioeng. 12, 849-871.
Van Suudam, J. C. and Metz, B. (1981) Influence of engineering variables upon morphology of filamentous moulds. Biotech. Bioeng. 23, 111-148.
Van't Riet, K. (1979) Review of measuring methods and results in non-viscous gas-liquid mass transfer in stirred vessels. Ind. Eng. Chem. Process Des. Dev. 18 (3), 357-360.
Van't Riet, K. (1983) Mass transfer in fermentation. Trends Biotechnol., 1 (4), 113-116.
Van't Riet, K. and Tramper, J. (1991) Basic Bioreactor Design. Marcel Dekker, New York.
Van't Riet, K. and Van Sonsberg, (1992) Foaming, mass transfer and mixing: Interrelations in large scale fermentations. In Harnessing Biotechnology for the 21st Century, pp. 189-192 (Editors Ladisch, M.R. and Bose, A.). American Chemical Society, Washington, DC.
Wang, D. I. C. and Fewkes, R. C. J. (1977) Effect of operating and geometric parameters on the behaviour of non-Newtonian mycelial antibiotic fermentations. Dev. Ind. Micro., 18, 39-57.
Wang, D. I. C., Cooney, C. L., Demain, A. L., Dunnill, P. Humphrey, A. E. and Lilly, M. D. (1979) Fermentation and Enzyme Technology. Wiley, New York.
Wernau, W. .C. and Wilke, C. R. (1973) New method for evaluation of dissolved oxygen probe response for KLa determination. Biotech. Bioeng. 15, 571-578.
Westerterp, K. R., Van Dierendonck, L. L. and De Kraa, J. A. (1963) Interfacial areas in agitated gas liquid contactors. Chem. Eng. Sci. 18, 157-169.
Winkler, M. A. (1990) Problems in fermenter design and operation. In Chemical Engineering Problems in Biotechnology, pp. 215-350 (Editor Winkler, M. A.). SCI/Elsevier, London.
Wise, W. S. (1951) The measurement of the aeration of culture media. J. Gen. Micro. 5, 167-177.
Wodzinski, R. S. and Johnson, M. J. (1968) Yield of bacterial cells form hydrocarbons. Appl. Micro. 16, 1886-1891.
Zhou, W., Holzhauer-Rieger, K., Dors. M. and Schugerl, K. (1992) Influence of dissolved oxygen concentration on the biosynthesis of cephalosporin C. Enzyme Microb. Technol. 14, 848-854.
Was this article helpful?
Discover How To Become Your Own Brew Master, With Brew Your Own Beer. It takes more than a recipe to make a great beer. Just using the right ingredients doesn't mean your beer will taste like it was meant to. Most of the time it’s the way a beer is made and served that makes it either an exceptional beer or one that gets dumped into the nearest flower pot.