References

Abson, J. W. and Todhunter, K. H. (1967) Effluent disposal. In Biochemical and Biological Engineering Science, Vol.1, pp. 309-343 (Editor Blakeborough, N.). Academic Press, London.

Aiba, S., Humphrey, A. E. and Millis, N. F. (1973) Biochemical Engineering (2nd Edition), Chapter 11, pp. 303-316. Academic Press, New York.

Anderson, J. G. and Blain, J. A. (1980) Novel developments in microbial film reactors. In Fungal Biotechnology, pp. 125-152 (Editors Smith, J. E., Berry, D. R. and Kristian-sen, B). Academic Press, London.

Applikon (1991) Silicone heating jacket for temperature control. Bioteknowledge (Applikon), (1), 9-11.

Armer, A. (1991) Steam utilization. In Plant Engineer's Reference Book, Section 13 (Editor Snow, D. A.). ButterworthHeinemann, London.

Arnold, R. H. and Steel, R. (1958) Oxygen supply and demand in aerobic fermentations. In Biochemical Engineering, pp. 149-181 (Editor Steel, R.). Heywood, London.

Atkinson, B. and Mavituna, F. (1991a) Reactors. Biochemical Engineering and Biotechnology Handbook (2nd edition), pp. 607-668. Macmillan, London.

Atkinson, B. and Mavituna, F. (1991b) Heat transfer. Biochemical Engingineering and Bioengineering Handbook (2nd edition), pp. 793-829. Macmillan, London.

Bailey, J. E. and Ollis, D. F. (1986) Biochemical Engineering Fundamentals (2nd edition), pp. 512-532. McGraw-Hill, New York.

Barker, W. A. M„ Van Can, H. J. L„ Tramper, J. and de Gooijer, C. D. (1993) Hydrodynamics and mixing in a multiple air-lift loop reactor. Biotech. Bioeng. 42 994-1001.

Becl, C., Stiefel, H. and Stinnett, T. (1987) Cell-culture bioreactors. Chem. Eng. 94, 121-129.

De Becze, G. and Liebmann, A. J. (1944) Aeration in the production of compressed yeast. Ind. Eng. Chem 36 882-890.

Besik, F. (1973) Multi-stage tower-type activated sludge process for complete treatment of sewage. Water Sewage Works (September), pp.122-127.

Blakeborough, N. (1967) Industrial fermentations. In Biochemical and Biological Engineering Science, Vol. 1, pp. 25-48 (Editor Blakeborough, N.). Academic Press, London.

Bliem, R. and Katinger, H. (1988) Scale-up engineering in animal cell technology: Part II. Trends Biotechnol. 6, 224-230.

Bliem, R., Konopitzky, K. and Katinger, H. (1991) Industrial animal cell reactor systems: aspects of selection and evaluation. Adv. Biochem. Eng. Biotechnol. 44, 1-26.

Boulton, C. A. (1991) Developments in brewery fermentation. Biotechnol. Genetic Eng. Rev. 9, 127-181.

British Valve Manufacturers Association (1972) Techni cal Reference Book on Values for the Control of Fluids ft edition).

Brown, W. E. and Peterson, W. H. (1950) Factors affecti, production of penicillin in semi-pilot plant equinmJf Ind. Eng. Chem. 42, 1769-1774. U'

Browne, P. C., Figueroa, C., Costello, M. A. C., Oakle • R. and MacIukas, S. M. (1988) Protein production fron' mammalian cells grown on glass beads. In Animal Cell Biotechnology, Vol. 3, pp. 251-262 (Editors, R. E. and Griffiths, J. B.) Academic Press, London. '

Buchter, H. H. (1979) Industrial Sealing Technology. Wiley New York.

Buckland, B. C., Gbewonyo, K, DIMassi, D., Hunt, (, Westerfield, G. and Nienow, A. W. (1988) Improved performance in viscous mycelial fermentations by agitator retrofitting. Biotech. Bioeng. 31, 737-742.

Buelow, G. H. and Johnson, M. J. (1952) Effect of separ . tion on citric acid production in 50 gallon tanks. Ind Eng Chem. 44, 2945-2946.

Burnett, J. M. (1993) The industrial production of citric acid. 124th Meeting of the Society for General Microbiology. Canterbury, U.K.

Butler, M. (1988) A comparative review of microcarriers available for the growth of anchorage dependent animal cells. In Animal Cell Biotechnology, Vol. 3, pp. 284-323 (Editors Spiers, R. E. and Griffiths, J. B.). Academic Press, London.

Callahan, J. R. (1944) Large scale production by deep fermentation. Chem. Metal. Eng. 51, 94-98.

Cameron, J. and Godfrey, E. I. (1969) The design and operation of high-power magnetic drives. Biotech. Bioeng 11, 967-985.

Carrington, R., Dixon, K„ Harrop, A. J. and Macaloney, G. (1992) Oxygen transfer in industrial air agitated fermentations. In Harnessing Biotechnology for the 21st Century, pp. 183-188 (Editors Ladisch, M. R. and Bose, A.). American Chemical Society, Washington, DC.

Chain, E. B., Paladino, S., Ugolini, F., Callow, D. S. and Van Der Sluis, J. (1952) Studies on aeration. 1. Bull. World Health Org. 6, 83-98.

Chain, E. B., Paladino, S., Ugolino, F.,Callow, D. S. and Van Der Sluis, J. (1954) A laboratory fermenter for vortex and sparger aeration. Rep. Inst. Sup. Sanita. Roma (Engl. Ed.), 17, 61-120.

Chapman, C. (1989) Client requirements for supply of contained bioreactors and associated equipment. In Proceedings of DTI/HSE/SCI Symposium on Large Scale Bioprocessing Safety, Laboratory Report LR 746 (BT), pp. 58-62 (Editor Salisbury, T.). Warren Spring Laboratories, Stevenage.

Chen, N. Y. (1990) The design of airlift fermenters for use in biotechnology. Biotechnol. Genetic Eng. Rev. 8, 379-396.

Cohee, R. F. and Steffen, G. (1959) Make vinegar continuously. Food Eng. 3, 58-59.

Collins, C. H. (1992) Hazard groups and containment categories in microbiology and biotechnology. In Safety in

, ,/ Microbiology and Biotechnology, pp. 23-33 (Edi- ■ r H and Beale, A. J.). Butterworth-Heine-

V1||)|)1 , l()N. J- C. and Bush, J. R. (1988) Mixing < ""Kl' S transfer in filamentous fermentations. In 2nd a0C! ^tional Conference on Bioreactor Fluid Dynamics, pp.

Editor King, R-)- Elsevier, I^ndon. ( l Wang, D. I. C. and Mateles, R. I. (1969)

' 'ment of heat evolution and correlation with oxy-

^Tconsumption during microbial growth. Biotech.

fiocwi 11,269-280.

^Performance of gas-liquid contactors. Ind. Eng. Chem. 36 504-509.

( "Vu ui i ii >11 in the biological process industries. Process

CuBBi-Ri y, W. H„ Unterweiser, P. M. Benjamin, D., Kirk' Patrick, C. W., Knoll, V. and Nieman, K. (1980) Stainless steels in corrosion service. In Metals Handbook (9th edition), Vol. 3, pp. 56-93. American Society for Metals, Ohio.

DiWSON P. S. S. (1974) The cyclone column fermenter. Biotech. Bioeng. Symp. 4, 809-819.

inwsoN, P. S. S. (1988) The Cyclone Column and continuous phased culture. In Biotechnology Research and Applications, pp. 141-154 (Editors Gavora, J., Gerson, D. F., Luong, J., Storer, A. and Woodley, J. H.). Elsevier, London.

Dijurkoop, A. (1992) Stainless steel reflects the quality of Applikon's bioreactors. Bioteknowledge (Applikon, Holland), 12(1), 4-6.

I- \st, D., stinnett, T. and Thoma, R. W. (1984) Reduction of biological risk in fermentation processes, by physical containment. Dev. Ind. Microbiol. 25, 89-105.

I-hnbr, H. and Follman, H. (1983) Vinegar. In Biotechnology, Vol. 5, pp. 425-446 (Editor Reed, G.) Verlag Chemie, Weinheim.

I i-ner. II., Pom., K. and Enekel, A. (1967) Self-priming aerator and mechanical defoamer for microbiological process. Biotech. Bioeng. 9, 357-364.

i i sworth, R., Capell, G. A. and Telling, R.C. (1958) Improvements in the design of a laboratory culture vessel. J. Appl. Bacterial. 21, 80-85.

i- vust, U., Prave, P. and Sukatsch, D. A. (1977) Continuous biomass production from methanol by Methylomonas clam. J. Ferm. Technol. 55, 605-614.

Finn, R. F. (1954) Agitation-aeration in the laboratory and in industry. Bacterial. Rev. 18, 254-274.

1 Bischaker, R. (1987) Microcarrier cell culture. In Large Scale Cell Culture Technology, pp. 59-79 (Editor Lyder-sen, B. K.). Manser, Munich.

i . ickinger, M. C. and Sansone, E. B. (1984) Pilot-and production-scale containment of cytotoxic and oncogenic fermentation processes. Biotech. Bioeng. 26, 860-870.

i ■ >rti.ni-, w. 15., McCormick, S. L., Rhodehamel, H. w and

Stefaniak, J. J. (1950) Antibiotics development. Ind. Eng. Chem. 42, 191-198.

Foust, H. G., Mack, D. E. and Rushton, J. H. (1944) Gas-liquid contacting by mixers. Ind. Eng. Chem. 36, 517-522.

Frommer, W. et al. (1989) Safety biotechnology. III. Safety precautions for handling micro-organisms of different risk classes. Appl. Microbiol. Biotechnol. 30, 541-552.

Gbewonyo, K, DiMasi, D. and Buckland, B. C. (1986) The use of hydrofoil impellers to improve oxygen transfer efficiency in viscous mycelial fermentaions. In International Conference on Biorector Fluid Dynamics, pp. 281-299. BHRA, Cranfield, U.K.

Giorgio, R. J. and Wu, J. J. (1986) Design of large scale containment facilities for recombinant DNA fermentations. Trends Biotechnol. 4, 60-65.

Gordon, J. J., Grenfell, E., Knowles, E., Legg, B. J. McAllister, R. C. A. and White, T. (1947) Methods for penicillin production in submerged culture on a pilot scale. J. Gen. Microbiol. 1, 171-186.

Greenshields, R. N. (1978) Acetic acid: vinegar. In Economic Microbiology, Vol. 2, pp. 121-186 (Editor Rose, A. H.). Academic Press, London.

Greenshields, R. N. and Smith, E. L. (1971) Tower fermentation systems and their applications. Chem. Eng. (London), (249), 182-190.

Griffiths, J. B. (1986) Scaling up of animal cell cultures. In Animal Cell Culture — A Practical Approach, pp. 33-69 (Editor Freshney, R. I.). IRL Press, Oxford.

Griffiths, J. B. (1988) Overview of cell culture systems and their scale-up. In Animal Cell Biotechnology, Vol. 3, pp. 179-220 (Editor Spier, R. E. and Griffiths, J. B.). Academic Press, London.

Hall, R. D. and Howard, G. A. (1965) Improvements in or relating to brewing of beer. British Patent 979,491.

Hambleton, P., Griffiths, B., Cameron, D. R. and Melling, J. (1991) A high containment polymodal pilot-plant- design concepts. I. Chem. Tech. Biotechnol. 50, 167-180.

Hamer, G. (1979) Biomass from natural gas. In Economic Microbiology, Vol. 4, pp. 315-360 (Editor Rose, A. H.). Academic Press, London.

Hastings, J. J. H. (1971) Development of the fermentation industries in Great Britain. Adv. Appl Microbiol 16, 1-45.

Hastings, J. J. H. (1978) Acetone-butanol fermentation. In Economic Microbiology, Vol. 2, pp. 31-45 (Editor Rose, A. H.). Academic Press, London.

Health and Safety Executive (1993) A guide to the Genetically Modified Organisms (Contained Use) Regulations, 1992. H.M.S.O., London.

Herbert, D., Phipps, P. J. and Tempest, D. W. (1965) The chemostat: design and instrumentation. Lab. Practice 14, 1150-1161.

Hesselink, P. G. M., Kasteijem, J. and Logtenberg, M. T. (1990) Biosafety aspects of biotechnological processes: testing and evaluating equipment and components. In

Fermentation Technology: Industrial Applications, pp. 378-382 (Editor Yu, P. L.). Elsevier, London.

Hirschel, M. D. and Gruenberg, M. L. (1987) An automated hollow fiber system for the large scale manufacture of mammalian cell secreted product. In Large Scale Cell Culture Technology, pp. 113-144 (Editor Lydersen, B. K.). Hanser, Munich.

Hoggan, J. (1977) Aspects of fermentation in conical vessels. J. Inst. Brewing, 83, 133-138.

Hough, J. S., Briggs, D. E. and Stevens, R. (1971) Malting and Brewing Science. Chapman and Hall, London.

Hromatka, O. and Ebner, H. (1949) Untersuchungen uber sie Essiggerung. 1. Fesselgarung und Durchlufrungsver-fahren. Enzymologia 13, 369-387.

Inskeep, G. C., Wiley, A. J., Holderby, J. M. and Hughes, L. P. (1951) Food yeast from sulphite liquor. Ind. Eng. Chem. 43, 1702-1711.

Irving, G. M. (1968) Construction materials for breweries. Chem. Eng. (N.Y.) 75(14), 100, 102-104.

Jackson, A. T. (1990) Basic heat transfer. In Process Engineering in Biotechnology, pp. 58-71. Open University Press, Milton Keynes.

Jackson, T. (1958) Development of aerobic fermentation processes: penicillin. In Biochemical Engineering, pp. 185-221 (Editor Steel, R.), Heywood, London.

Janssen, D. E., Lovejoy, P. J., Simpson, M. T. and Kennedy, L. D. (1990) Technical problems in containment of rDNA organisms. In Fermentation Technologies: Industrial Applications, pp. 388-393 (Editor Yu, P. L.). Elsevier, London.

Johnson, M. J. (1971) Fermentation — yesterday and tomorrow. Chem. Tech. 1, 338-341.

Katinger, H. W. D. (1977) New fermenter configuration. In Biotechnology and Fungal Differentiation, FEMS Symp. 4, 137-155 (Editors Meyrath, J. and Bu'Lock, J. D.). Academic Press, London.

Kemplay, J. (1980) Valve Users Manual. Mechanical Engineering Publications, London.

Kennedy, L. D., Boland, M. J., Jannsen, D. E. and Frude, M. J. (1990) Designing a pilot-scale fermentation facility for use with genetically modified micro-organisms. In Fermentation Technologies: Industrial Applications, pp. 383-387 (Editor Yu, P. L.). Elsevier, London.

Kitai, A., Tone, H. and Ozaki, A. (1969). The performance of a perforated plate column as a multistage continuous fermenter. 1. Washout and growth phase differentiation in the column. J. Ferm. Technol. 47, 333-339.

Kuraishi, M., Teroa, I., Ohkouchi, H., Matsuda, N. and Nagai, I. (1977) SCP-process development with methanol as substrate. DECHEMA Monograph (1978), 83, (1704-1723), 111-124.

Lavery, M. (1990) Animal cell fermentation. In Fermentation — A Practical Approach, pp. 205-220 (Editor McNiel, B. and Harvey, L. M.). IRL Press, Oxford.

Leaver, G. (1994) Interpretation of regulatory requirements to large scale biosafety — The role of the industrial biosafety project. In International Safety Aspects in

Biotechnology (Editors Hambleton, P., Salusbury, t. and Melling, J.). Elsevier, Amsterdam.

Leaver, G. and Hambleton, P. (1992) Designing bioreactors to minimize or prevent inadvertant release into the workplace and natural environment. Pharmac. Technol. (April) 18-26.

Lee, S. S., Erikson, L. E. and Fan, L. T. (1971) Modeling and optimization of a tower type activated sludge system Biotech. Bioeng. Symp. 2, 141-173.

Levi, J. D., Shennan, J. L. and Ebbon, G. P. (1979) Biomass from liquid n-alkanes. In Economic Microbiology, Vol. 4 pp. 362-419 (Editor Rose, A. H.). Academic Press, London.

Lydersen, B. K. (1987) Perfusion cell culture system based on ceramic matrices. In Large Scale Cell Culture Technology, pp. 169-192 (Editor Lydersen, B. K). Hanser, Munich.

Marshall, R. D., Webb, C„ Matthews, T. M. and Dean, J. F. (1990) Automatic aseptic sampling of fermentation broth. In Practical Advances in Fermentation Technology, pp. 6.1-6.11. Inst. Chem. Eng. North Western Branch Symposium Papers No. 3. University of Manchester Institute of Science and Technology.

Martini, L. J. (1984) Practical Seal Design. Dekker, New York.

Maule, D. R. (1986) A century of fermenter design. /. Inst. Brew. 92, 137-147.

Mayer, E. (1961) Vinegar by oxidative fermentation of alcohol. U.S. Patent 2,997,424.

McAdams, W. H. (1954) Heating and cooling inside tubes. Heat Transmission (3rd edition), pp. 202-251. McGraw-Hill, New York.

Meyrath, J. and Beyer, K. (1979) Biomass from whey. In Economic Microbiology, Vol. 4, pp. 207-269 (Editor Rose, A. H.). Academic Press, London.

Mijnbeek, G. (1991) Sheer stress effects on cultured animal cells. Bioteknowledge (Applikon), (1), 3-7.

Miller, F. D. and Rushton, J. H. (1944) A mass velocity theory for liquid agitation. Ind. Eng. Chem. 36, 499-503.

Mitchell, C. A. (1926) Vinegar: Its Manufacture and Examination (2nd edition). Griffin, London.

Muller, R. and Kiesuch, K. (1966) Technology of the microbiological preparation of organic substances. Angwante Chem. {Int. Ed.) 5, 653-662.

Nathan, L. (1930) Improvements in the fermentation and maturation of beer. J. Inst. Brewing, 36, 538-550.

Nienow, A. W. (1990) Agitators for mycelial fermentations. Trends Biotechnol. 8, 224-233.

Nienow, A. W. (1992) New agitators versus Rushton turbines: A critical comparison of transport phenomena. In Harnessing Biotechnology for the 21st Century, pp. 193-196 (Editors Ladisch, M. R. and Bose, A.). American Chemical Society, Washington, DC.

Nienow, A. W., Allsford, K. V., Cronin, D., Huoxing, L., Haozhung, W. and Hudcova, V. (1988) The use of large ring spargers to improve the performance of fermenters agitated by single and multiple standard Rushton turbines. In 2nd International Conference on Bioreactor Fluid Dynamics, pp. 159-177 (Editor King, R.). Elsevier, London.

Nienow, A. W. and Ulbrecht, J. J. (1985) Fermentation Broths. In Mixing of Liquids by Mechanical Agitation, pp. 203-235 (Editord Ulbrecht, J. J. and Patterson, G. E.). Gordon and Breach, New York.

Nienow, A. W., Waroeskerken, M. M. C. G., Smith, J. M. and Konno, M. (1985) On the flooding/loading transition and the complete dispersal conditions in aerated vessels agitated by a Rushton turbine. Proc. 5th European Mixing Conference, pp. 143-154. BHRA, Cranfield.

Noble, T. G., Jackman, M. I. and Badger, E. M. H. (1964) The biological treatment of gas liquor in aeration tanks and packed towers. /. Inst. Sewage Purification 5, 440-463.

Okabe, M., Ohta, N. and Park, Y. S. (1993) Itaconic acid production in an air-lift bioreactor using a modified draft tube. J. Ferm. Bioeng. 76, 117-122.

Owen, W. L. (1948) Continuous fermentation. Sugar, 43, 36-38.

Paca, J., Ettler, P. and Gregr, V. (1976) Hydrodynamic behaviour and oxygen transfer rate in a pilot plant fermenter. J. Appl. Chem. Biotechnol. 26, 310-317.

Parker, A. (1958) Sterilization of equipment, air and media. In Biochemical Engineering—Unit Processes in Fermentation, pp. 94-121 (Editor Steel, R.) Heywood, London.

Pikulik, A. (1976) Selecting and specifying valves for new plants. Chem. Eng. N.Y. 83, 168-190.

Prokop, A. and Votruba, J. (1976) Bioengineering problems connected with the use of conventional and unconventional raw materials in fermentation. Folia Microbiol. 21, 58-69.

Prokop, A., Erikson, L. E., Fernandez, J. and Humphrey, A. E. (1969) Design and physical characteristics of a multistage continuous tower fermenter. Biotech. Bioeng. 11, 945-966.

Propst, C. L., Von Wedel, R. J. and Lubiniecki, A. S. (1989) Using mammalian cells to produce products. In Fermentation Process Development of Industrial Organisms, pp. 221-276 (Editor Neway, J. O.). Dekker, New York.

Richards, J. W. (1968) Design and operation of aseptic fermenters. In Introduction to Industrial Sterilization., pp. 107-122. Academic Press, London.

Rivett, R. W., Johnson, M. J. and Peterson, W. H. (1950) Laboratory fermenter for aerobic fermentations. Ind. Eng. Chem. 42, 188-190.

Rohr, M., Kubicek, C. P. and Kominek, J. (1983) Citric acid. In Biotechnology, Vol. 3, pp. 419-454 (Editor Dallweg, H.). Verlag Chemie, Weinheim.

Schofield, G. M. (1992) Current legislation and regulatory frameworks. In Safety in Industrial Microbiology and Biotechnology, pp. 6-22 (Editors Collins, C. H. and Beale, A. J.). Buttterworth-Heinemann, London.

Scholler, M. and Seidel, M. (1940) Yeast production and fermentation. U.S. Patent 2,188,192.

Schreier, K. (1975) High-efficiency fermenter with deep-jet aerators. Chemiker Zeitung 99, 328-331.

Schugerl, K. (1982) New bioreactors for aerobic processes. Int. Eng. Chem. 22, 591-610.

Schugerl, K. (1985) Nonmechanically agitated bioreactor systems. In Comprehensive Biotechnology, Vol. 2, pp. 99-118 (Editors Cooney, C. L. and Humphrey, A. E.). Pergamon Press, Oxford.

Schugerl, K., Lucre, J. and Oels, U. (1977) Bubble column bioreactors. Adv. Biochem. Eng. 7, 1-84.

Scragg, A. H. (1991) Bioreactors in Biotechnology — A Practical Approach, pp. 112-125. Ellis Horwood, Chichester.

Sharp, D. H. (1989) The development of Pruteen by ICI. In Bioprotein Manufacture, pp. 53-78. Ellis Horwood, Chichester.

Shore, D. T., Royston, M. G. and Watson, E. G. (1964) Improvements in or relating to the production of beer. British Patent 959,049.

Shuttlewood, J. R. (1984) Brew Distilling Int. (August), p.22.

Sittig, W. (1982) The present state of fermentation reactors. J. Chem. Tech. Biotechnol. 32, 47-58.

Smith, J. M. (1985) Dispersion of gases in liquids: the hydrodynamics of gas dispersion in low viscosity liquids. In Mixing of Liquids by Mechanical Agitation, pp.139-201 (Editors Ulbrecht, J. J. and Patterson, G. K.). Gordon and Breach, New York.

Smith, S. R. L. (1980) Single cell protein. Phil. Trans. Roy. Soc. (London) B 290, 341-354.

Snell, R. L. and Schweiger, L. B. (1949) Production of citric acid by fermentation. U.S. Patent 2,492,667.

Solomons, G. L. (1969)Materials and Methods in Fermentation. Academic Press, London.

Solomons, G. L. (1980) Fermenter design and fungal growth. In Fungal Biotechnology, pp. 55-80 (Editors Smith, J. E., Berry, D. R. and Kristiansen, B). Academic Press, London.

Spivey, M. J. (1978) The acetone-butanol-ethanol fermentation. Process Biochem. 13(11), 2-4, 25.

Steel, R. and Maxon, W. D. (1961) Power requirements of a typical actinomycete fermentation. Ind. Eng. Chem. 53, 739-742.

Steel, R. and Maxon, W. D. (1966) Studies with a multiple-rod mixing impeller. Biotech. Bioeng. 8, 109-115.

Steel, R. and Miller, T. L. (1970) Fermenter design. Adv. Appl. Microbiol. 12, 153-188.

Steel, R., Lentz, C. P. and Martin, S. M. (1955) Submerged citric acid production of sugar beet molasses: increase in scale. Can. J. Microbiol. 1, 299-311.

Strauch and Schmidt (1932) German Patent 552,241. Cited by de Becze and Liebmann (1944).

Taylor, I. J. and Senior, P. J. (1978) Single cell proteins: a new source. Endeavour (N.S.), 2, 31-34.

Thaysen, A. C. (1945) Production of food yeast. Food (May), pp. 116-119.

Thielsch, H. (1967) Manufacture, fabrication and joining of commercial piping. In Piping Handbook (5th edition), pp. 7.1-7.300 (Editor King, R. C.). McGraw-Hill, New York.

Titchener-Hooker, N. J,, Sinclair, P. A., Hoare, M., Vranch, S. P., Cottam, A. and Turner, M. K. (1993) The specification of static seals for contained operations; an engineering appraisal. Pharmaceutical Technol. (Europe) October, 26-30.

Tolbert, W. R., Srigley, W. R. and Prior, C. P. (1988) Perfusion culture systems for large-scale pharmaceutical production. In Animal Cell Biotechnology, Vol. 3, pp. 374-393 (Editors Spiers, R. E. and Griffiths, J. B.). Academic Press, London.

Trinci, A. P. J. (1992) Mycoprotein: A twenty year overnight sucess story. Mycol. Res. 96, 1-13.

Tubito, P. J. (1991) Contamination control facilities for the biotechnology industry. In Cleanroom Design, pp. 85-120 (Editor Whyte, W.). Wiley, Chichester.

Turner, M. K. (1989) Categories of large-scale containment for manufacturing processes with recombinant organisms. Biotechnol. Gen. Eng. Rev. 7, 1-43.

Ulenberg, G. H., Gerritson, H. and Huisman, J. (1972) Experiences with a giant cylindro-conical tank. Master Brew. Assoc. Amer. Q. 9, 117-122.

Van Houten, J. (1992) Containment of fermentations: Comprehensive assessment and integrated control. In Harnessing Biotechnology for the 21st Century, pp. 415-418 (Editors Ladisch, M. R. and Bose, A.). American Chemical Society, Washington, DC.

Van Wezel, A. L. (1967) Growth of cell strains and primary cells on microcarriers in homogenous cultures. Nature (London) 216, 64-65.

Victorero, F. A. (1948) Apparatus for continuous fermentation. U.S. Patent 2,450,218.

Vranch, S. P. (1992) Engineering for safe bioprocessing. In Safety in Industrial Microbiology and Biotechnology, pp.

176-189 (Editors Collins, C. H. and Beale, A. J.). Butterworth-Heinemann, London.

Walker, J. A. H. and Holdsworth, H. (1958) Equipment design. In Biochemical Engineering, pp. 223-273 (Editor Steel, R.). Heywood, London.

Walker, P. D., Narendranathan, T. J., Brown, D. c Woodhouse, F. and Vranch, S. P. (1987) Containment of micro-organisms during fermentation and downstream processing. In Separation for Biotechnology, pp. 469-479 (Editors Verrall, M. S. and Hudson, M. J.). Ellis Hor-wood, Chichester.

Watanabe, K. (1976) Production of RNA. In Microbial Production of Nucleic Acid Related Substances, pp. 55-65 (Editors Ogata, K., Kinoshita, S., Tsonoda, T. and Aida, K.). Kodansha, Tokyo and Halsted, New York.

Wegrich, R. H. and Shurter, R. A. (1953) Development of a typical aerobic fermentation. Ind. Eng. Chem 4s 1153-1160.

Werner, R. G. (1992) Containment in the development and manufacture of recombinant DNA-derived products. In Safety in Industrial Microbiology and Biotechnology, pp 190-213 (Editors Collins, C. H. and Beale, A. J.). Butterworth-Heinemann, London.

Wilkinson, P. J. (1987) The development of a large scale production process for tissue culture products. In Biore-actors and Biotransformation, pp.111-120 (Editors Moody, G. W. and Baker, P. B.). Elsevier, London.

Winkler, M. A. (1990) Problems in fermenter design and operation. In Chemical Engineering Problems in Biotechnology, pp. 215-350 (Editor Winkler, M. A.). SCI/Elsevier, London.

Wu, W. T. and Wu, J. Y. (1990) Air lift reactor with draught tube. J. Ferm. Bioeng. 70, 359-361.

Was this article helpful?

0 0
Vinegar For Your Health

Vinegar For Your Health

A resource for the many ways you can use Vinegar to improve your health! In today's society of miracle medicine, we often overlook things that have been around hundreds of years! Things like Vinegar!

Get My Free Ebook


Post a comment