References Chapters 6 and

1. Kister, H. Z., Distillation Operation, McGraw-Hill, New York, 1990.

2. Bolles, W. L., Pet. Process., Feb. 1956, p. 65; March 1956, p. 82; Apr. 1956, p. 72; May 1956, p. 109.

3. Bolles, W. L., in B. D. Smith, Design of Equilibrium Stage Processes, McGraw-Hill, New York, 1963.

4. Ludwig, E. E., Applied Process Design for Chemical and Petrochemical Plants, 2d ed., vol. 2, Gulf Publishing, Houston, 1979.

5. Van Winkle, M., Distillation, McGraw-Hill, New York, 1967.

7. Glitsch, Inc., "Ballast Tray Design Manual," Bulletin 4900,4th ed., Dallas, Texas, 1974.

8. Koch Engineering Co., Inc., "Design Manual—Flexitray," Bulletin 960-1, Wichita, Kansas, 1982.

9. Nutter Engineering, "Float Valve Design Manual," Tulsa, Oklahoma, 1976.

11. Holland, C. D., Fundamentals of Multicomponent Distillation, McGraw-Hill, New York, 1981.

12. Lockett, M. J., Distillation Tray Fundamentals, Cambridge University Press, Cambridge, England, 1986.

13. Souders, M., Jr., and G. G. Brown, Ind. Eng. Chem., 26(1). p. 98,1934.

14. Kirschbaum, E., Destillier und Rektifiziertechnik, 4 Aufl, Springer Verlag, Berlin, 1969.

—- 15. Kister, H, Z., and J. R. Haas, Chem. Eng. Prog. 86(9), p. 63, 1990.

16. Hoppe, K., and M. Mittelstrass, Chem. Tech. 18(9), p. 533, 1966.

17. Zuiderweg, F. J., Chem. Eng. Sei., 37(10), p. 1441, 1982.

18. Fair, J. R., D. E. Steinmeyer, W. R. Penney, and B. B. Crocker in R. H, Perry and D. W. Green (eds.), Chemical Engineers' Handbook, 6th ed., chap. 18, McGraw-Hill, New York, 1984.

19. Fair, J. R., Petro/Chem. Engr. 33(10), p, 45, 1961.

20. Smith, R. B„ T. Dresser, and S. Ohlswager, Hydrocarb. Proc. & Pet. Ref. 42(5), p. 183,1963.

21. Gerster, J. A., W. H. Slack, Jr., and S. A. Harrison, Ind. Eng. Chem. Proc. Des. Dev. 5(4), p. 409, 1966.

22. Sakata, M., and T. Yanagi, I. Chem. E. Symp. Ser. 56, p. 3.2/21, London, 1979.

23. Yanagi T., and M. Sakata, Ind. Eng. Chem. Proc. Des. Dev. 21, p. 712, 1982.

24. Porter, K. E., and J. D. Jenkins, /. Chem. E. Symp. Ser. 56, Summary Papier, London, 1979.

25. Kister, H. Z., and I. D. Doig, Hydrocarb. Proc., 56(9), p. 149,1977.

26. Lemieux, E. J., and L. J. Scotti, Chem. Eng. Prog. 65(3), p, 52, 1969.

27. Kister, H. Z„ W. V. Pinczewski, and C. J. D. Fell, Ind. Eng. Chem. Proc. Des. Dev. 20, p. 528, 1981.

28. Kreis, H„ and M. Raab, I. Chem. E. Symp. Ser. 56, p. 3.2/63, 1979.

29. Stichlmair, J., Grundlagen der Dimensionierung des Gas/Flussigkeit-Kontak-tapparates Bodenkolonne, Verlag Chemie, Weinheim, 1978.

30. Chase, J. D„ Chem. Eng., July 31, p. 105, 1967 and ibid., Aug. 28, p. 139, 1967.

31. Fair, J. R., in B. D. Smith, Design of Equilibrium Stage Processes, McGraw-Hill, New York, 1963.

32. Treybal, R. E., Mass Transfer Operations, 3d ed., McGraw-Hill, New York, 1980.

33. Fair, J. R., in W. C. Rousseau, Handbook of Separation Process Technology, Wiley, New York, 1987.

34. Fair, J. R„ and R. L. Matthews, Pet Refiner, 37(4), p. 153, 1958.

35. Jeronimo, M. A. da S., and H. Sawistowski, Trans. Inst. Chem. Engrs. (London ■, 51, p. 265, 1973.

36. Kister, H. Z„ and J. R. Haas, I. Chem. E. Symp. Ser. 104, p. A483,1987.

37. Mayfleld, F. D„ W. L. Church, A. C. Green, D. C. Lee, and R. W. Rasmussen, Ind. Eng. Chem., 44, p. 9, 2238, 195Z.

38. Friend, L., E. J. Lemieux, and W. C. Schreiner, Chem. Eng., Oct. 31, p. 101,1960.

39. Hunt, C. d'A, D. N. Hanson, and C. R. Wilke, AIChE J. 1, p. 441, 1955.

40. Kister, H. Z„ and J. R. Haas, Ind. Eng. Chem. Res. 27, 2331, 1988.

41. Chatterjee, N., Paper presented at the AIChE Meeting, New Orleans, March 12-16,1973.

42. Thomas, W. J., in H. Sawistowski (ed.), Final Report by the ABCM/BCPMA Distillation Panel, Chem. Ind. Assoc., London, 1964.

43. Lockett, M. J., and A. A. W. Gharani, I. Chem, E. Symp. Ser., 56, p. 2.3/43, 1979.

44. Hoek, P. J., and F. J. Zuiderweg, AIChE J. 28(4), p. 535, 1982.

45. Zuiderweg, F. J., Proc. 2nd World Congress of Chem. Eng., vol. IV, p. 26ä. Montreal, 1981.

46. Thomas, W. J., and A. N. Shah, Trans. Inst. Chem, Eng. (London), 42, T71, 1964.

47. Bolles, W. L., Distillation Theory and Practice—Intensive Course, University of New South Wales/University of Sydney, August 9-11, 1977.

48. Leibson, I., R. E. Kelley, and L. A. Bullington, Pet. Ref., 36(2), p. 127, 1957.

49. Maddox, R. N. Process Engineer's Absorption Pocket Handbook, Gulf Publishing. Houston, 1985.

50. Glitsch, Inc., "44 Frequently Asked Questions and Answers about Trays and Packing," Bulletin No. 681R1, Dallas, Texas, 1983.

51. Branan, C., The Fractionator Analysis Pocket Handbook, Gulf Publishing, Houston, 1978.

52. Fell, C. J. D., and W. V. Pinczewski, /. Chem. E. Symp. Ser. 73, p. Dl, London. 1982.

53. Kister, H. Z., W. V. Pinczewski, and C. J. D. Fell, Paper presented in the 90th National AIChE meeting, Houston, April 1981.

54. Bain, J. L., and M. Van Winkle, AIChE J. 7(3), p. 363,1961.

55. Lockett, M. J., G. T. Spiller, and K. E. Porter, Trans. Inst. Chem. Engrs. (London. 54, p. 202, 1976.

55a. Koziol, A., and J. Maikowiak, Chem. Eng. Process., 27, p. 145, 1990.

56. Lockett, M. J„ and S. Banik, Ind. Eng. Chem. Proc. Des. Dev. 25, p. 561, 1986.

57. Banik, S., "Non-Uniform Weeping and Its Effect on Tray Efficiency," Paper presented at the AIChE National Meeting, Houston, April 1989.

58. Col well, C. J., and J. T. O'Bara, Paper presented at the AIChE National Spring Meeting, Houston, April 1989.

59. Smith, V. C., J. C. Upchurch, and D. W. Weiler, Chem. Eng. Prog. 77(9), p. 48,196L

60. Brambilla, A., E. Gianolio, and G. F. Nencetti, I. Chem. E. Symp. Ser. 56, p. 3.2 L London,1979.

62. Zenz, F. A. in P. A. Schweitzer (ed.), Handbook of Separation Techniques fv Chemical Engineers, Sec. 3.2, McGraw-Hill, New York, 1979.

63. Hsieh, C. L., and K. J. McNulty, Paper presented at the annual Meeting of tbe AIChE, Miami Beach, Florida, November 2-7,1986.

64. Zanelli, S., and R. Del Bianco, Chem. Eng. J. 6, p. 181, 1973.

65. Fasesan, S. O., Ind. Eng. Chem. Proc. Des. Dev. 24, p. 1073, 1985.

66. Hugh mark, G. A., and H. E. O'Connell, Chem. Eng. Prog. 53(3), p. 127, 1957.

67. Davies, J. A., and K. F. Gordon, Petro Chem. Eng., Oct. 1961, p. 230; Nov. 1961, p. 250; Dec. 1961, p. 228.

6«. Colwell, C. J„ Ind. Eng. Chem. Proc. Des. Dev., 20 (2). p. 298, 1981.

69. Hsieh, C. L. (Koch Engineering Co.), Private communication, 1991.

70. Zhang, L., X. Wang, X. Xu, and F. Shen, Paper presented at the AlChE national meeting, Houston, April 1989.

71. Bolles, W. L„ Chem. Eng. Progr. 72(9), p. 43, 1976.

72. Banik, S., "Weeping from Valve Trays," Paper presented at the AlChE National Meeting, Houston, April 1989.

73. Klein, G. F„ Chem. Eng., Sept. 17, p. 128, 1984.

74. Lieberman, N. P., Process Design for Reliable Operations, 2d ed., Gulf Publishing, Houston, 1988.

75. Zuiderweg, F. J., H. Verbürg, and F. A. H. Gilissen, International Symposium on Distillation, p. 201, Institution of Chemical Engineers, (London), 1960.

76. Kister, H. Z.( and T. C. Hower, Jr., Plant/Operations Prog. 6 (3), p. 161, 1987.

77. Prince, R. G. H., International Symposium on Distillation, The Institution of Chemical Engineers (London), p. 177, 1960.

78. Prince, R. G. H„ and B. K. C. Chan, Trans. Inst. Chem. Engrs. (London), 43, p. T49, 1965.

79. Chan, B. K. C„ Ph.D. thesis, University of Sydney, Australia, 1965.

81. Bennett, D. L., R. Agrawal, and P. J. Cook, AlChE J. 29(3), p. 434, 1983.

82. Sargent, R. W. H., J. D. T. Bernard, W. P. McMillan, and R. C. Schroter, in H. Sawistowski, (ed.) Final Report by the ABCMIBCPMA Distillation Panel, Chem. Ind. Assoc., London, 1964.

83. Bernard, J. D. T., and R. W. H. Sargent, Trans. Inst. Chem. Engrs. (London), 44, p. T314, 1966.

84. AlChE Research Committee, Tray Efficiencies in Distillation Columns, Final report from the University of Delaware, 1958.

85. Hofhuis, P. A M., and F. J. Zuiderweg, I. Chem. E. Symp. Ser. 56, p. 2.2/1, 1979.

86. Dhulesia, H., Chem. Eng. Res. Des. 62, p. 321, 1984.

87. Chen, J. J. J., Chem. Eng. Res. Des., 63, p. 206, 1985.

88. Payne, G. J., and R. G. H. Prince, Trans. Inst. Chem. Engrs. (London) 55, p. 266, 1977.

89. Lockett, M. J„ Trans. Inst. Chem. Engrs. (London) 59, p. 26, 1981.

90. Pinczewski, W. V., and C. J. D. Fell, Ind. Eng. Chem. Proc. Des. Dev. 21, p. 774,1982.

91. Barber, A D., and E. F. Wtfn, I. Chem. B. Symp. Ser. 56, p. 3.1/15, 1979.

92. Pinczewski, W. V., and C. J. D. Fell, Trans. Inst. Chem. Engrs. (London) 50, p. 102, 1972.

93. Todd, W. G„ and M, Van Winkle, Ind. Eng. Chem. Proc. Des. Deo., 11(4), p. 678, 1972; and ibid., p. 589, 1972.

94. Weisa, S., and J. Langer, I. Chem, E. Symp. Ser. 56, p. 2.3/1, 1979.

95. Brambflla, A, G. Nardini, G. F. Nencetti, and S. Zanelli, I. Chem. Eng. Symp. Ser., No. 32, p. 2:63, London, 1969.

96. Glitsch, Inc., "Glitsch Ballast Trays, A-l, V-l, V-0, Experimental Test Data," Bulletins 159/160 (revised), Dallas, 1983.

97. Anderson, R. H., G. Garrett, and M. Van Winkle, Ind. Eng. Chem. Proc. Des. Dev. 15(1), p. 96, 1976.

98. Stahl Apparate und Geratebau GmbH, Varioflex Valve W16/L Bulletin, Viernheim, Germany.

99. Prince, R. G. H., PACE, June 1975, p. 31; July 1975, p. 18.

100. Wallis, G. B., One-Dimensional Two-Phase Flow, McGraw-Hill, New York, 1969.

101. Ho, G. E„ R. L. Muller, and R. G. H. Prince, I. Chem. E. Symp. Ser. 32, p. 2:10, 1969.

102. Steiner, L., R. Hunkeler, and S. Hartland, Trans. Inst. Chem. Engrs. (London), 55, p. 153, 1977.

103. Prado, M., K. J. Johnson, and J. R. Fair, Chem. Eng. Prog. S3(3), 32, 1987.

104. Zuiderweg, F. J„ P. A. M. Hofhuis, and J. Kuzniar, Chem. Eng. Res Des. 62, p. 39, 1984.

105. Zuiderweg, F. J., Int. Chem. Eng. 26(1), p. 1, 1986.

106. Loon, R. E., W. V. Pinczewski, and C. J. D. Fell, Trans. Inst. Chem. Engrs. (London) 51, p. 374, 1973.

107. Porter, K. E„ and P. F. Y. Wong, I. Chem. E. Symp. Ser. 32, p. 2:22, 1969.

108. Fell, C. J. D„ and W. V. Pinczewski, Chem. Engr. (London), p. 45, January 1977.

109. Wong, P. F. Y., and W. K. Kwan, Trans. Inst. Chem. Engrs. (London) 57, p. 205,

Was this article helpful?

0 0

Post a comment