J

Height of the bed in the bioreactor

Diameter of the bioreactor

Thickness of the bioreactor wall

Total mass of bioreactor wall

Volumes of air per bed volume per minute

Outlet gas water humidity set pointb

Fold increase in the solids-to-gas heat and mass transfer coefficients

Initial systems temperaturec

Temperature of the inlet air

Set point (cooling water temperature control)

Gain (cooling water temperature control)

Initial water activity of the gas phased

Water activity of the inlet aire

Initial water activity of the solids phasef

0.2 m 0.15 m 5 mm calculated as tcDHL kg (L in m) 1 vvm 0.87 1

0 (Tw constant at Tsetpomt)

Was this article helpful?

0 0

Post a comment